Replacing the 4 speed transmission, Replacing the 4 speed transmission with the – Advance Adapters AX15 User Manual
Page 31

P/N 50-0214
31
REPLACING THE 4 Speed TRANSMISSION:
REPLACING THE 4 Speed TRANSMISSION:
REPLACING THE 4 Speed TRANSMISSION:
REPLACING THE 4 Speed TRANSMISSION:
REPLACING THE 4 Speed TRANSMISSION:
P/N 27-0021G
-
GM NV4500
for replacing the Land Cruiser FJ40 4 speed
(16 spline)
-
Full bellhousing design
When replacing the stock 4 speed, the added length of the NV4500 will, in most cases, position the engine in an ideal location
to eliminate driveline modifications. The output shaft on this kit must be shortened to expose the 31 spline area located under
the harmonic balancer.
This kit includes:
This kit includes:
This kit includes:
This kit includes:
This kit includes:
P/N 50-0213
-
Transfer case adapter kit
(Adapter length of 5.875”)
P/N 712576
-
Bellhousing kit
P/N 716288
-
Land Cruiser slave cylinder bracket
P/N 716316
-
Throw out bearing
P/N 716050C
-
Shifter handle assembly
P/N 27-0021T
-
29 spline
DODGE Gas NV4500 replacing the Land Cruiser FJ40 4 speed
(16 spline)
-
Full bellhousing design
When replacing the stock 4 speed, the added length of the NV4500 will, in most cases, position the engine in an ideal location
to eliminate driveline modifications. The stock front retainer must also be machined to accept the new throw out bearing.
This kit includes:
This kit includes:
This kit includes:
This kit includes:
This kit includes:
P/N 50-0223
-
Transfer case adapter kit
(Adapter length of 6.375”)
P/N 716288
-
Land Cruiser slave cylinder bracket
P/N 712576
-
Bellhousing kit
P/N 716316
-
Throw out bearing
P/N 716050D1
- Shifter handle assembly
This kit is designed for our NV4500 transmission P/N 26-0029RGM. If you are obtaining your own transmission, you will need to
order a new input shaft to work with the bellhousing.
P/N 52-0221
- GM input shaft.
REPLACING THE 4 Speed TRANSMISSION WITH THE
REPLACING THE 4 Speed TRANSMISSION WITH THE
REPLACING THE 4 Speed TRANSMISSION WITH THE
REPLACING THE 4 Speed TRANSMISSION WITH THE
REPLACING THE 4 Speed TRANSMISSION WITH THE
Split 19 Spline TRANSFER CASE
Split 19 Spline TRANSFER CASE
Split 19 Spline TRANSFER CASE
Split 19 Spline TRANSFER CASE
Split 19 Spline TRANSFER CASE
P/N 27-0022G
-
GM NV4500
for replacing the Land Cruiser FJ40/FJ60 4 speed
(19 spline split-case)
-
Full bellhousing design
This adapter does not have provisions to retain the stock transmission crossmember. When using this NV4500 adapter, a custom
crossmember will need to be fabricated.
This kit includes:
This kit includes:
This kit includes:
This kit includes:
This kit includes:
P/N 50-0214
-
Transfer case adapter kit
(Adapter length of 5.875”)
P/N 712576
-
Bellhousing kit
P/N 716288
-
Land Cruiser slave cylinder bracket
P/N 716316
-
Throw out bearing
P/N 716050C
-
Shifter handle assembly
P/N 27-0022T
-
29 spline
DODGE Gas NV4500 replacing the L/C FJ40/FJ60 4 speed
(19 spl. split-case)
-
Full bellhousing design
This adapter does not have provisions to retain the stock transmission crossmember. When using this NV4500 adapter, a custom
crossmember will need to be fabricated. This kit requires the installation of a GM input shaft into your Dodge transmission. The
stock front retainer must also be machined to accept the new throw out bearing.
This kit includes:
This kit includes:
This kit includes:
This kit includes:
This kit includes:
P/N 50-0224
-
Transfer case adapter kit
(Adapter length of 6.375”)
P/N 716288
-
Land Cruiser slave cylinder bracket
P/N 712576
-
Bellhousing kit
P/N 716316
-
Throw out bearing
P/N 716050D1
- Shifter handle assembly