Cleaning your equipment – Apple Workgroup Server 6150/66 User Manual
Page 96

m Locate the small hole near the disk drive’s opening, and carefully insert the
end of a large straightened paper clip into it. Push gently until the disk is
ejected. Do not use excessive force.
If nothing works, take the server or disk drive to your Apple-authorized
service provider to have the disk removed.
Power supply
The power supply in your server is a high-voltage component and should not be
opened for any reason, even when the server is off. If the power supply needs
service, contact your Apple-authorized dealer or service provider.
Cleaning your equipment
Follow these general rules when cleaning the outside of your server and its
components:
m Use a damp, soft, lint-free cloth to clean the server’s exterior. Avoid getting
moisture in any openings.
m Don’t use aerosol sprays, solvents, or abrasives.
Cleaning the server case
To clean the case, do the following:
1
Turn off the server and disconnect the power plug. (Pull the plug, not the cord.)
2
Wipe the surfaces lightly with a clean, soft cloth dampened with water.
80
Appendix A / Safety, Maintenance, and Health Information