Apple Workgroup Server 6150/66 - Manual (Page 125)

2 Turn off the server.
3 Plug a stereo miniplug into the sound output port on the server.
4 Plug a stereo miniplug into the Audio In socket on one of the speakers.
If the speakers take a dual-plug cable, connect both plugs.
5 Connect the speakers together with speaker wires, if necessary.
6 Turn on the server.
Now you hear the computer’s sound through the external speakers.
Note: To control the volume of your external speakers, open the Sound
control panel and choose Volumes in the pop-up menu. Use the Built-in
Headphones slider to adjust your external speakers. If you are playing an audio
CD, you may also need to adjust the volume control in the program you’re
using to play CDs.
Playing audio CDs
You can play audio CDs by using your server’s internal CD-ROM drive or an
external CD-ROM drive or CD player that you’ve connected to your server.
Follow these steps to play CD audio sound through the server’s internal speaker:
1 Place an audio CD in the CD-ROM drive or CD player.
See the information that came with your server or external equipment for
details about inserting a CD.
2 Use the Sound control panel to choose the CD-ROM drive or CD player as the sound
input device and click Play-Through to hear the CD.
3 Use your audio CD software to play the CD.
If you have either the CD Remote program or the AppleCD Audio Player
program, choose the program from the Apple (
K) menu and click Play.
See the instructions that came with your CD-ROM drive for more information
about playing audio CDs.
Playing audio CDs 109