Apple Workgroup Server 6150/66 - Manual (Page 88)

If the test reveals a problem, you may be able to correct it by using Disk First
Aid or another disk repair program (see the instructions in the next section). If
you cannot correct the problem you may need to initialize the disk (again,
using Apple HD SC Setup) and reinstall system software (see “Reinstalling
System Software” earlier in this chapter). If necessary, consult an Apple-
authorized service provider for assistance.
How to repair a hard disk or floppy disk
You can repair some types of disk damage by using the Disk First Aid
program, which is included on the Workgroup Server Software CD-ROM disc.
1 If you are repairing your startup disk, start up your server from the Workgroup Server
Software CD-ROM disc; otherwise, just insert the CD-ROM disc.
If you need instructions for starting up from the Workgroup Server Software
CD-ROM disc, see “Starting Up From the CD-ROM Drive” in the section
“Reinstalling System Software” earlier in this chapter.
2 Open the Workgroup Server Software CD-ROM disc icon and then open the Utilities folder.
3 Open the Disk First Aid icon.
The Disk First Aid window opens. Disk icons appear in a box at the top of
the window.
WARNING If the damaged disk has been formatted for use with Apple
RAID Software, see the Apple RAID Software Administrator’s Guide
for information about repairing disks that contain RAID volumes.
72 Chapter 5 / Troubleshooting