Apple Workgroup Server 6150/66 - Manual (Page 11)

This guide tells you how to set up your Workgroup Server 6150/66 and
connect it to your LocalTalk or Ethernet network. The guide also provides
information about expanding your server, using software, and troubleshooting
problems that may arise.
Note: For easier reading, the Workgroup Server 6150/66 will be referred to as
the Workgroup Server 6150 throughout this guide.
About your Workgroup Server 6150 and Power Macintosh software
Your Workgroup Server 6150 is powered by the new PowerPC microprocessor
(or “chip”). This microprocessor was designed by Apple Computer, Inc.,
Motorola, Inc., and IBM Corporation. The PowerPC microprocessor uses
Reduced Instruction Set Computer (RISC) technology to deliver very high
performance at the lowest possible cost. The PowerPC RISC microprocessor
represents the state of the art in microprocessor design.
Your Workgroup Server 6150 will run almost all of your existing Macintosh
software, but for best performance and greatest speed, look for software programs
designed especially for Power Macintosh computers. You’ll find Power
Macintosh programs at any software store that carries products for Macintosh.
Preface About This Guide