Apple Workgroup Server 6150/66 - Manual (Page 36)

4 Plug the adapter’s power cord into a power outlet.
5 Plug the connector on the Apple Ethernet AUI Adapter into the Ethernet port on the server.
The server is preset to use the network software connection for Ethernet. You
can use network services as soon as you start up the server.
Connecting to a LocalTalk network
The Apple LocalTalk Locking Connector Kit DIN-8, available from your Apple-
authorized dealer, lets you connect the server to an existing LocalTalk network by
means of the printer port.
To connect the server to a LocalTalk network:
1 Make sure that the server is turned off.
2 Attach the LocalTalk adapter to the printer port.
3 Plug one end of a LocalTalk cable into the LocalTalk adapter.
4 Plug the other end of the cable into the last LocalTalk adapter on the network.
Printer port icon
Printer port
20 Chapter 2 / Connecting to the Network