Apple Workgroup Server 6150/66 - Manual (Page 37)

Now that you have made the server’s physical connection to LocalTalk, you
can start up the server.
IMPORTANT After connecting to a LocalTalk network (if you have not also
connected to Ethernet), each time you start up the server you’ll see a dialog
box that indicates an error condition. This dialog box informs you that the
system has made a temporary switch from EtherTalk (its preset network
software connection) to LocalTalk. You will see this message until you change
the default setting in the Network control panel. After you turn the server on
(as described in Chapter 1), be sure to continue with the next section in this
chapter to learn how to switch the setting in the Network control panel.
Printer port
LocalTalk adapter
LocalTalk cable
Connecting to a LocalTalk network 21