Apple Power Macintosh 9600 - Manual (Page 8)

8 Chapter 1
Connecting the mouse and keyboard
The way you connect the mouse and keyboard depends on whether the
keyboard has a built-in cable or a separate cable.
Connecting a keyboard with a built-in cable
1 Plug the mouse cable into the recessed port on the back of the keyboard.
The plug and the port are marked with the V icon (symbol). The positions of
the port and icon on your keyboard may be different from those pictured.
2 If the front or side of your monitor has a port marked with the V icon, plug the keyboard
cable into this port. Otherwise, plug the keyboard cable into the port marked with the V
icon on the back of the computer.
This cable plugs into the Apple Desktop Bus (ADB) port,
marked with the
V icon, on the back of the computer.
Plug the mouse into the recessed port on
the keyboard. The flat part of the plug should
be pointing down, as shown here.