Apple Power Macintosh 9600 - Manual (Page 181)

11 Click Continue.
The Easy Install dialog box appears.
12 Make sure that the hard disk named in the Destination Disk box is the one on which you
want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
13 Click Install.
14 Follow the onscreen instructions.
15 When you see a message reporting that the installation was successful, click Restart.
If your computer does not start up properly, see “If the Installation was not
Successful,” next.
16 If necessary, install or reinstall other software that may be missing from your
startup disk.
If you erased your hard disk prior to installing system software, certain system
extensions or application programs that were originally on your hard disk may
need to be reinstalled. Some additional extensions and programs are on the
CD-ROM disc that contains system software. System extensions or application
programs from other vendors can be reinstalled from their installation disks.
181 Diagnostic Techniques