Apple Power Macintosh 9600 - Manual (Page 115)

4 Align the DRAM DIMMs in the DRAM slots as pictured.
IMPORTANT Do not touch the DIMM’s connectors. Handle the DIMM only by
the edges.
DRAM DIMM (Your DIMM’s shape and
components may vary.) Ejector (Your slot may have one
or two ejectors. They should be
pushed outward and down to be in
the “open” position, as shown.)
The DRAM DIMM is designed to fit into
the slot only one way. Be sure to align the
notches in the DIMM with the small ribs inside
the slot. With the ejector(s) in the “open”
position (as shown), push down on the DIMM
until it snaps into place. The ejector(s) will
automatically “close.”
Connectors
Notches
DRAM slot (1 of 12)
(Toward front of computer )
Ribs (inside slot)
115 Installing PCI Expansion Cards and Additional Memory