Apple Power Macintosh 9600 - Manual (Page 164)

The computer makes unusual sounds.
m A program may need your attention. If an icon is blinking in the menu bar,
open the menu, choose the program whose icon is blinking (it may have a
diamond by its name), and take the necessary action.
m Open the Easy Access control panel (if it is installed on your computer)
and check whether any of its features are turned on.
m Select a different system sound in the Sound control panel.
m If the sounds are regular or melodic, they may be caused by interference
from electrical equipment. Move the computer farther away from any such
equipment.
See also “The Computer Makes an Unusual Sound at Startup” in the section
“Problems Turning On or Starting Up Your Computer” earlier in this chapter.
Problems with your printer
The following suggestions should work for all printers. (Note: Also refer to
the manual that came with the printer.)
m Make sure that the printer driver for your printer is turned on in the
Extensions Manager control panel in the Control Panels folder in the
Apple (K) menu. To find out the name of the printer driver—for example,
LaserWriter—refer to the documentation that came with your printer.
m Check your printer settings in the Chooser (in the Apple [K] menu),
making sure you have selected the correct printer. If you are using a printer
that is shared by other computer users (a printer on a local network), make
sure that AppleTalk (in the lower-right corner of the Chooser) is active. If
you are using your own printer (a serial printer connected to your
computer), make sure that AppleTalk is inactive.
m Turn off the computer and printer and check the printer cable connections.
m If none of these suggestions solves the problem, you may need to reinstall
the printer driver that came with your printer. Refer to the manual that
came with your printer. (See the following important note.)
164 Chapter 10