Apple Power Macintosh 9600 - Manual (Page 10)

2 Plug the keyboard cable (both ends are the same) into the other ADB port on the
keyboard.
If you plugged the mouse cable in on the right, for example, plug the keyboard
cable in on the left.
3 If the front or side of your monitor has a port marked with the V icon, plug the keyboard
cable into this port. Otherwise, plug the keyboard cable into the port marked with the V
icon on the back of the computer.
4 If you want to adjust the angle of the keyboard, slide the tab in the back of the keyboard.
Turning the computer on
To turn on the computer for the first time, follow these steps:
1 Turn on your monitor.
See the information that came with your monitor for the location of the power
switch. On newer Apple monitors, the power switch is located on the front of
the unit.
Note: You may not see the monitor power come on until you turn on the
computer in the next step.
A bar extends as the
slide is moved, increasing
the keyboard angle.
10 Chapter 1