Apple Macintosh Performa 6360 Series - Manual (Page 90)

Typing on the keyboard produces nothing on the screen.
One of the following is probably the cause:
m You haven’t selected any text or set the insertion point (i).
Make sure the program you want to type in is the active program. Then
place the pointer (8
) in the active window and click to set an insertion point
(i) or drag to select text (if you want to replace the text with your typing).
m If the computer beeps every time you press a key, Easy Access is probably
turned on. Open the Extensions Manager control panel in the Control
Panels folder in the Apple (K) menu. Click the checkmark next to
Easy Access to remove the checkmark and to turn it off. Then restart
your computer.
m The keyboard is not connected properly.
Turn off the computer by pressing the standby power button (®) on the
back of the computer. With the computer off, check that the keyboard cable
is connected properly at both ends.
m Some system software features are turned on that affect the way the
keyboard works.
Open Easy Access from the control panels listed under the Apple (K)
menu and turn off Sticky Keys, Slow Keys, and Mouse Keys.
m There is a software problem.
Restart your Macintosh. For instructions, see “Start Over by Restarting Your
Computer” in the section “If You Have Trouble” earlier in this chapter.
90 Chapter 6