Apple Macintosh Performa 6360 Series - Manual (Page 51)

3 Use a SCSI cable to connect the device either to the computer’s SCSI port or to the last
SCSI device in the chain.
IMPORTANT Make sure that the last (or only) device in the SCSI chain has a
terminator and that no other external SCSI device has a terminator.
Otherwise, the computer may not be able to start up.
4 Turn on all devices in your SCSI chain.
IMPORTANT Always turn on any external SCSI devices connected to your
Macintosh before turning on the computer itself. Otherwise, your computer
won’t be able to recognize that the SCSI devices are connected to it and it
may not be able to start up.
5 Install any necessary device drivers (software that makes a device work with your
computer).
Drivers, software needed for a SCSI device, usually come on a floppy disk
with the device. (If no drivers come with the device, contact its manufacturer.)
Note: If you experience problems after connecting a SCSI device, see the
troubleshooting information in Chapter 6 for possible solutions.
Expanding memory
For information on increasing your computer’s memory, see Chapter 8,
“Installing Expansion Cards or Additional Memory.”
51 Expanding Your Computer and Using Its Special Features