Apple Macintosh Performa 6360 Series - Manual (Page 101)

Problems playing audio CDs
You don’t hear any sound when you play an audio CD or an audio track on a CD-ROM
disc using the AppleCD Audio Player.
m If you have headphones or speakers connected to the computer, make sure
they are firmly connected. Make sure the volume control on your
headphones or speakers is not turned down too low.
m If you do not have headphones or speakers connected to the computer,
make sure that nothing else is plugged into the computer’s sound
output port (-).
m If you are using a CD-ROM disc over a network, you won’t be able to hear
the audio portion.
m Make sure the volume is turned up in the AppleCD Audio Player. With the
program open, drag the volume control slider up, use the volume controls
on your computer, or press the Up Arrow key on your keyboard.
m The CD may have been paused. Click the Play/Pause button in the
AppleCD Audio Player once or twice.
m If your CD-ROM drive was installed after you bought your computer, make
sure the audio cable is properly connected. See the documentation that
came with the CD-ROM drive.
While playing an audio track on a CD-ROM disc that combines audio tracks and data,
you double-click the disc icon and the audio track stops playing.
m You can’t open data files on a CD-ROM disc and listen to audio tracks on it
at the same time.
You are unable to record sound from an audio CD.
m You may need to reset the sound options in the Monitors & Sound control
panel. Refer to the “Sound” topic of Macintosh Guide, available in the
Guide (h) menu.
101 Troubleshooting