Apple Macintosh Performa 6360 Series - Manual (Page 85)

m The disk may have been formatted for use on another kind of computer.
You may be able to use a program that lets you work with such disks on
your Macintosh.
If you are trying unsuccessfully to use a DOS floppy disk, consider
the following:
m When formatting floppy disks on a DOS computer for use in a Macintosh,
you need to format standard double-sided disks as 720K disks and high-
density disks as 1440K disks. Double-sided disks formatted in 1440K
format and high-density disks formatted in 720K format may not work in
a Macintosh.
If you think your DOS floppy disk might have a format that doesn’t work
in a Macintosh, use a DOS computer to copy the contents of the disk onto
a properly formatted disk.
m Make sure the PC Exchange control panel is in the Control Panels folder
(in the Apple [K] menu) and that it is enabled. To enable PC Exchange,
open the Extensions Manager control panel and click the PC Exchange
item (under the Control Panels heading) to make a checkmark appear.
Then restart your computer.
Your computer starts up and you see large folder-shaped areas containing labeled
pictorial buttons, instead of the usual Macintosh desktop.
m Your computer may have started up from a CD-ROM disc containing
At Ease, an alternative to the Macintosh desktop. You need to have the
Macintosh desktop on your screen before you can use any of the software
installation instructions in this manual.
To return to the Macintosh desktop, choose Shut Down from the Special
menu. After your computer has shut down, restart it and then immediately
press the Open/Close button of your CD-ROM drive to open the tray.
Remove the CD-ROM disc and gently close the tray. Your computer
finishes starting up.
Note: To avoid having the computer start up from a CD-ROM disc,
remember to remove any disc in the drive before you shut down
your computer.
85 Troubleshooting