Apple Macintosh Performa 6360 Series - Manual (Page 3)

If the computer starts up: If you hear a tone, the computer has started up. You
need to turn it off before proceeding. To do so, press the power button (also
called the standby power button), marked with the ® symbol on the back of
the computer.
Connecting a monitor
You can connect many types of monitors to your Macintosh. To connect a
monitor, refer to the instructions that came with it in addition to the
instructions here.
Connecting the monitor power cord
Monitors have two cords to connect: a monitor power cord and a monitor
video cable.
To connect the monitor power cord, follow these steps:
1 Place the monitor where you’ll be using it.
You may place it on top of your computer. Keep these considerations in mind:
m Allow 3 or more inches for air circulation around the sides of the computer
and monitor.
m Position the monitor so the top of the screen is slightly below eye level
when you sit at the keyboard.
m Position the monitor to minimize glare and reflections on the screen from
overhead lights and windows.
m Consult “Arranging Your Office” in Appendix A for suggestions on
positioning your computer equipment.
3 Getting Started