Apple Macintosh Performa 6360 Series - Manual (Page 133)

8 Gently pull down on the wire handle and swing it out to unlock it from its storage
position. Then grasp the handle and gently pull the logic board out of the computer.
The vertical plate and the logic board to which it’s attached slide all the way
out of the computer.
9 Once the logic board is out, set it on a clean, flat, stable surface. Rest the end of it on a
thick magazine or a thin book to protect the components underneath.
What you do next depends on whether you’re installing an expansion card,
memory, or a High Performance Module. Go to the pertinent section in
this chapter.
Illustrat
ion Worl
d News
Vol. 1, No. 1
Rest the logic board on a clean, flat, stable surface.
Place a thick magazine under this end of the logic
board to help protect the components underneath.
133 Installing Expansion Cards or Additional Memory