Apple Macintosh Performa 6360 Series - Manual (Page 159)

Handling your computer equipment
Follow these guidelines for handling your computer and its components:
m When setting up your computer, place components on a sturdy, flat surface,
and carefully follow all setup instructions.
m When connecting or disconnecting a cable, always hold the cable by its
connector (the plug, not the cord).
m Turn off your computer and all its components before connecting or
disconnecting any cables to add or remove any component. Failure to do so
could seriously damage your equipment.
m Never force a connector into a port. If the connector and port do not join
with reasonable ease, they probably don’t match. Make sure that the
connector matches the port and that you have positioned the connector
correctly in relation to the port.
m Take care not to spill any food or liquid on the computer, keyboard, mouse,
or other components. If you do, turn your computer off immediately and
unplug it before cleaning up the spill. Depending on what you spilled and
how much of it got into your equipment, you may have to bring your
equipment to an Apple-authorized service provider.
m Protect the computer and its components from direct sunlight and rain or
other moisture.
m Keep all ventilation openings clear and unobstructed. Without proper
air circulation, components can overheat, causing damage or
unreliable operation.
WARNING This equipment is intended to be electrically grounded. Your
Macintosh is equipped with a three-wire grounding plug—a plug that
has a third (grounding) pin. This plug will fit only a grounded AC outlet.
This is a safety feature. If you are unable to insert the plug into the
outlet, contact a licensed electrician to replace the outlet with a properly
grounded outlet. Do not defeat the purpose of the grounding plug!
159 Health, Safety, and Maintenance Tips