Apple Macintosh Performa 6360 Series - Manual (Page 78)

3 If the Power key doesn’t work, hold down the
x
and Control keys while you press the
Power key (
π
).
This key combination restarts the computer. (Use this key combination only
when you can’t choose Restart from the Special menu or restart the computer
using the Power key.)
4 If your computer still doesn’t restart, press the standby power button (
®
) on the back of
the computer to turn it off, wait at least 10 seconds, and turn it on again.
If you suspect that the problem is with other equipment, such as a printer or
an external hard disk that’s attached to your computer, turn that equipment off
for 10 seconds or longer, then turn it on again and restart the Macintosh.
Rebuild your desktop
A process known as “rebuilding the desktop” helps your Macintosh keep
track of data on your startup disks. (Although the hard disk in your computer
is usually the startup disk, you can start up from any other disk that has
system software installed.) It’s a good idea to rebuild your desktop once a
month or so.
Rebuilding your desktop can solve a number of problems. For example, when
application documents are no longer represented by application-specific icons
(and are instead represented by generic icons on the desktop), rebuilding the
desktop fixes the problem.
Some extensions may interfere with rebuilding your desktop. To prevent
problems, you’ll need to turn off all extensions except Macintosh Easy Open
before you rebuild your desktop. When you finish rebuilding the desktop, turn
the extensions you normally use back on.
To rebuild the desktop of a startup disk, follow these steps:
1 Open the Extensions Manager control panel by choosing Extensions Manager from the
Control Panels submenu of the Apple (
K
) menu.
2 From the Sets pop-up menu, choose Save Set.
78 Chapter 6