Apple Xsan 2 (Third Edition) - Manual (Page 100)

100
Use this chapter to find solutions to common problems you
might encounter while working with a SAN.
Look here for solutions to common problems you might encounter while setting up,
managing, or using an Xsan SAN.
If You Can’t Connect to a Computer Using Xsan Admin
If there is a firewall between the administrator computer and the SAN computer,
make sure TCP port 311 is open.
If You Can’t Install the Xsan Software
If the installer says you can’t install the Xsan 2 software on a computer, make sure
the computer has an Intel processor and Mac OS X or Mac OS X Server v10.5 or v10.6
installed.
If Computers Aren’t Listed in Xsan Admin
If a computer you want to add to the SAN as a metadata controller or client isn’t listed
in Xsan Admin, make sure:
You’ve installed the Xsan software on the computer. Â
The computer is powered on. Â
The computer isn’t sleeping and isn’t set to sleep (in the Energy Saver pane of Â
System Preferences).
The computer is on the same TCP/IP subnets as the other SAN components.
Â
(If you’re using a private and a public Ethernet network, all SAN components
must be connected to both.)
8
Solving SAN Problems