Apple Color StyleWriter 2200 - Manual (Page 93)

84 Chapter 6
More than one piece of paper passes through the printer at a time
Follow these steps:
1 Remove all the paper from the sheet feeder.
2 Turn off the printer.
3 Turn the printer back on.
4 Put the paper back in.
Do not force the paper into the sheet feeder.
Paper or envelopes feed improperly
If paper tears, gets skewed, or comes through the printer crumpled, it may not
be entering the printer properly. Try the following:
m
Make sure you have loaded the paper correctly.
For instructions on loading paper, see “Positioning Print Materials in the
Sheet Feeder” in Chapter 2.
m
Do not overload the sheet feeder.
The feeder holds up to 5 envelopes or up to 30 sheets of 20-pound paper.
If you use heavier paper, fewer sheets will fit in the feeder.
m
Make sure nothing has fallen into the sheet feeder.
Remove any paper from the sheet feeder, then carefully turn the whole
printer upside-down and shake it.
m
Try to remove any torn or damaged pieces of paper from the printer.
See “Paper Is Jammed,” earlier in this chapter.