Apple Color StyleWriter 2200 - Manual (Page 91)

82 Chapter 6
Sometimes the lights on the printer signal a problem.
m
Both lights are off. To conserve energy, the printer turns itself off if it’s left
idle for some time (usually about 5 minutes). If you suspect a problem,
press the power button. If the lights remain off, check to make sure the
power adapter is plugged in properly and the outlet has power, or that the
battery attachment has been connected properly. If you can’t turn the
printer lights on, see the information about service and support that came
with the printer.
m
Both lights are blinking. The battery is low and you need to charge it. See
“Charging the Battery” in Chapter 3.
m
The error light glows steadily. Either the printer is out of paper or the paper
has misfed. Check your computer screen for messages. See Chapter 1 for
instructions on loading the sheet feeder, or “Paper Is Jammed” and “Paper
or Envelopes Feed Improperly” later in this chapter.
m
The error light blinks. The ink cartridge may not be seated properly. Open the
cartridge access door and make sure the cartridge is inserted correctly. For
instructions, see “Installing an Ink Cartridge” in Chapter 1. After checking
the cartridge, make sure the cartridge access door is closed completely.
The printer seems slow
See the suggestions in “Speed” in Chapter 4.
If you have a Macintosh IIfx, Macintosh Quadra 900, or Quadra 950
computer, check the Serial Switch control panel. Make sure the setting is
“Compatible.”