Apple Color StyleWriter 2200 - Manual (Page 64)

54 Chapter 3
Charging the battery
Depending on printing conditions, the battery in the Color StyleWriter 2200
needs charging after about 200 pages of printing. When the battery is low, the
printer stops printing.
To charge the battery, follow these steps:
1 Make sure the battery is installed in the battery attachment.
2 Connect the power adapter to the battery attachment, and plug the adapter into an outlet
or a power strip.
Be sure to use either the power adapter that comes with your printer or the
optional universal power adapter.
The green charge light on the side of the battery attachment blinks while the
battery charges. The battery will continue to charge for up to 10 hours. When
the battery is completely charged, the green light will stop blinking.
Note: The green light indicates the charging conditions of the battery. When
you disconnect the power adapter after the battery has finished charging, the
green light goes out and the charged battery is ready to power the printer.
You can use the printer with the power adapter while the battery is charging,
and you can charge the battery without connecting the battery attachment to
the printer.