Apple Color StyleWriter 2200 - Manual (Page 62)

6 Insert the battery into the battery attachment.
Align the battery contacts with the contacts in the battery attachment as
shown, and press until the battery clicks into place. Do not touch the battery
contacts on the battery or in the battery attachment.
Note: To remove the battery, see “Replacing the Battery” later in this chapter.
7 Return the printer to its upright position.
WARNING Damaged nickel-metal hydride batteries may leak small
amounts of potassium hydroxide. This substance can cause severe burns
to the skin and eyes. If you touch a damaged battery, immediately rinse
your hands and any other affected areas with water for at least 5
minutes. Do not use soap.
WARNING Do not touch the battery contacts with metal objects such as
paper clips or keychains. Doing so can cause burns or start a fire. When
not using the battery attachment, you should remove the battery and
store it. If the battery remains in the attachment, a small amount of
battery power is consumed, which over time will reduce the battery’s
charge.
Insert the battery here.
52 Chapter 3