Apple Color StyleWriter 2200 - Manual (Page 36)

25 Printing
Positioning print materials in the sheet feeder
The sheet feeder holds paper, envelopes, or other materials and feeds them
automatically into the printer. To position print materials in the sheet feeder,
follow these steps:
1 Open the printer by pulling up the top cover.
IMPORTANT Don’t mix envelopes with paper in the feeder.
2 Place the paper in the sheet feeder and adjust the paper guide.
3 Before you print, make sure that you set the software options to indicate the size and
kind of material you’re using.
m In the Page Setup dialog box, indicate the size of the page.
m In the Print dialog box, indicate the paper type.
Adjust the paper guide. Insert three-hole punched
paper so the holes line up
along this side.
Make sure the paper
lines up evenly at this side
of the feeder.
Insert envelopes this way.
(Make sure the flap is
smoothed flat.) Insert letterhead paper
face up with the top of the
page pointing downward.