Brocade Communications Systems Brocade Backbone DCX 8510-4 User Manual
Page 151
Brocade DCX 8510-4 Backbone Hardware Reference Manual
131
53-1002177-05
FX8-24 blade
B
•
Virtual E_ports.
•
FCIP QoS.
•
Support for 200 ms RTT (on a limited number of GbE ports).
•
Adaptive Rate Limiting (licensable).
•
TCP performance graphing in Web Tools.
•
FCIP Tunnels.
-
A maximum of 10 FCIP Tunnels for all GbE ports.
-
Four tunnels maximum per GbE port.
-
Two 10 GbE ports can support up to ten FCIP tunnels each.
-
Each FCIP tunnel is represented and managed as a virtual Fibre Channel E_Port.
-
Fibre Channel Routing Services can be used over the FCIP link.
-
The Link Cost is equal to the sum of all established/low metric (or currently active) circuits’
MAX rates in the tunnel.
-
Fabrics connected through FCIP merge if the ports are configured as VE_Ports, and do not
merge if they are configured as VEX_Ports. If VE_Ports are used in a Fibre Channel Routing
Services backbone fabric configuration, then the backbone fabric merges, but the
EX_Port-attached edge fabrics do not merge. For more information refer to the Fabric OS
Administrator’s Guide.
•
Up to three FC trunking groups. The three groups are defined as:
-
Trunk group 0: FC ports 0,1
-
Trunk group 1: FC ports 6,7
-
Trunk group 2: FC ports 2,3,4,5,8,9,10,11