Brocade dcx 8510-4 chassis removal and replacement, Figure 35 – Brocade Communications Systems Brocade Backbone DCX 8510-4 User Manual
Page 114
94
Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-05
Brocade DCX 8510-4 chassis removal and replacement
5
8510 chassis can also be connected in a full mesh configuration as shown in
8510-8 chassis are shown in the figure, the chassis can be either 8510-4 or 8510-8. In this
example, the trunk groups are shown in color.
FIGURE 35
DCX 8510 full mesh ICL topology
Brocade DCX 8510-4 chassis removal and replacement
This section describes how to remove and replace the Brocade DCX 8510-4 chassis (with its
backplane). The basic steps are:
1.
Faulty Brocade DCX 8510-4 chassis indicators
2.
Recording critical Brocade DCX 8510-4 and SAN information
3.
Disconnecting from the network and fabric
Trunked ICLs
Trunked ICLs
Trunked ICLs