AEM Infinity Supported Applications - Mitsubishi 2006 Evolution IX Engine - Manual (Page 16)

16
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware
Reference
7100-XXXX-62
7101-XXXX-63
Function
Dest.
Pin
Evo
VIII
Dest.
Pin
Evo IX
Hardware Specification Notes
C1-70 Stepper_1A Stepper 1A 4 14
Automotiv e, Programmable
Stepper Driv er, up to 28V and
±1.4A
Be sure that each internal coil of the
stepper motor is properly paired with
the 1A/1B and 2A/2B ECU outputs.
Supports Bi-Polar stepper motors
only .
C1-71 Stepper_2B Stepper 2B 18 29
Automotiv e, Programmable
Stepper Driv er, up to 28V and
±1.4A
Be sure that each internal coil of the
stepper motor is properly paired with
the 1A/1B and 2A/2B ECU outputs.
Supports Bi-Polar stepper motors
only .
C1-72 Stepper_1B Stepper 1B 17 28
Automotiv e, Programmable
Stepper Driv er, up to 28V and
±1.4A
Be sure that each internal coil of the
stepper motor is properly paired with
the 1A/1B and 2A/2B ECU outputs.
Supports Bi-Polar stepper motors
only .
C1-73 Power Ground Ground Power Ground Connect directly to battery ground.
C2-1 DBW2 Motor +
DBW Motor
Control Open
5.0A max Throttle Control
Hbridge Driv e
+12V to open
C2-2 DBW2 Motor -
DBW Motor
Control Close
5.0A max Throttle Control
Hbridge Driv e
+12V to close
C2-3 Power Ground Ground Power Ground Connect directly to battery ground.
C2-4 Injector 7 Injector 7
Saturated or peak and hold, 3A
max continuous
Injector 7
C2-5 Injector 8 Injector 8
Saturated or peak and hold, 3A
max continuous
Injector 8
C2-6 Injector 9 Injector 9
Saturated or peak and hold, 3A
max continuous
Injector 9
C2-7 Injector 10 Injector 10
Saturated or peak and hold, 3A
max continuous
Injector 10
C2-8 Power Ground Ground Power Ground Connect directly to battery ground.
C2-9 +12V +12V In 12 v olt power f rom relay
12 v olt power f rom relay . Relay must
be controlled by +12V Relay Control
signal, pin C1-29 abov e.
C2-10 Injector 11 Injector 11
Saturated or peak and hold, 3A
max continuous
Not used
C2-11 Injector 12 Injector 12
Saturated or peak and hold, 3A
max continuous
Not used