beautypg.com

AEM 30-8761 CAS Trigger Disc User Manual

Page 8

background image

Page 8 of 25

Remove the three bolts on the CAS sensor using a 10mm socket as shown in figure 11.
Take care not to turn the sensor. Mark with your Sharpie so that the sensor can be
reinstalled correctly as shown in figure 12. Figure 13 shows the cam with the CAS
assembly removed. (If you turn the sensor by accident, make sure to align it with cam and
mark it)

Figure 11: Removal of 3 CAS sensor bolts using 10mm socket

Figure 12: Mark shaft relative to housing for correct reinstallation onto cam