AEM 30-8761 CAS Trigger Disc - Manual (Page 16)

Page 16 of 25
Figure 27: Star socket removed from CAS sensor
This is another step that requires a little finesse or a friend. Remove the remaining
bearing using a pair of pliers with flat jaws to have a firm grip on the shaft but be
narrow enough to fit in between the collar on the shaft and the bearing. Hit the pliers
with a mallet. Note how the shaft is placed into the vise in figure 28. Figure 29 shows
the bearing removed from the shaft.
Figure 28: Removal of bearing from shaft using pliers