AEM 30-1931 Universal Fuel Ignition Controller 8 Channel User Manual
Page 21
Page 21
Using Passwords
The FIC has user selectable password capabilities. To add a password to a non
password file, click File>Change Cal-File PIN and follow the on-screen instructions.
When prompted, enter the new PIN. PIN’s are case sensitive. When opening an
existing file with a PIN, the software will prompt the user to enter the PIN before fully
opening the file. An error window will appear if an incorrect PIN is entered.
To change a password file to a non password file, follow the procedure described
for changing a password. When prompted to enter the new PIN, enter 12345678. A
password will not be required the next time the file is opened.
When connecting the FIC to the PC, the FIC will connect as normal if both the
calibration and password on the PC match the calibration and password in the FIC. If
there is a mismatch of passwords and or calibrations between the PC and FIC, a pop-
up window will appear, explaining the available options. Remember, there is NO undo
function for copying cal files. If you don’t know what to do, select cancel.
Figure 31. Boost Map