Operating, Starting travel, Changing travel direction – SkyTrak 10054 Operation Manual User Manual

Page 70: Stop the vehicle by applying the service brakes, Operation

Model 10054

Rev. 11/03

Operation

Starting Travel

1. Enter the operator cab, fasten the seat belt, start the engine, apply

the service brake pedal and disengage the parking brake switch.

2. Rotate the twist grip of the range select lever (1) to 1st gear.

3. Move the travel select lever (2) to (F) FORWARD to travel in a for-

ward direction or to (R) REVERSE to travel backward.

4. Slowly remove your foot from the service brake pedal and press the

accelerator pedal to start travel.

IMPORTANT! Check for warning lights frequently during operation. Any
abnormal indication should be corrected as soon as practical.

Changing Travel Direction

1. Stop the vehicle by applying the service brakes.

2. Grasp the travel select lever, pull it toward the steering wheel, then

move the lever up or down in the opposite direction;
(R) REVERSE or (F) FORWARD.

Operating

OH3270

OH3260