SkyTrak 10054 Operation Manual - Manual (Page 192)

190 Model 10054 Rev. 11/03
Test Procedures
If steps 1 through 5 prove positive, the Boom/Outrigger Interlock System is
functioning properly and the vehicle can be returned to service. If any of
these steps indicate that the Boom/Outrigger Interlock System is not
functioning properly, contact your local Sky Trak Distributor immediately to
repair the system.
IMPORTANT! Perform Steps 5 thru 9 with the engine rpm at idle.
Step 5
a. Attempt to frame sway the vehicle to the right and left; it
should frame sway, but at a slower speed than normal.
b. The Stabil-TRAK light should remain ON.
c. Return the vehicle to a level position.
Step 6
a. Place the travel select lever in the (N) NEUTRAL position,
move the neutral lock lever to the NEUTRAL LOCK
position.
b. Fully retract the boom.
c. Raise the outriggers.
d. Engage the parking brake switch, shut the engine OFF
and remove the key.
e. Exit the vehicle using both handholds.
Boom/Outrigger Interlock System Test Procedures
BOOM
EX
T
E
N
D
MO
D
E
1
BOOM
E
X
TE
ND
MO
DE
3