General maintenance – SkyTrak 10054 Operation Manual User Manual

Page 165

Text mode
Original mode

General Maintenance

163

Model 10054

Rev. 11/03

5. Go to the back of the vehicle and remove the rear cover from the

back of the boom.

6. Check the measurement (4) from the top rear edge of the primary

intermediate boom (5) to the top rear edge of the secondary inter-
mediate boom (6). Measurement should be between 8.5"
(216 mm) - 11" (279 mm).

NOTE: If the measurement is less than 8.5" (216 mm) the boom may
require extensive adjustment and/or repair. Contact your local Sky Trak
Distributor.

REAR OF BOOM

OH2860