Setting up the model 725 – BNC 725 User Manual
Page 7
7
Setting Up the Model 725
1. Plug the power cable from the back of the Model 725 into a 100–250 VAC power outlet.
2. Connect the 9-pin cable to the back of the Model 725 and to a free serial port on the PC.
3. Press the Power button on the front of the Model 725.
4. From your computer, run timerpro.exe to launch timerPRO.
5. From within timerPRO, select View > Options>Com Port. The Serial Communications
Properties screen will open.
6. Select the port to which the Model 725 is connected. The Model 725 will automatically detect
the baud rate, which is typically set to 38400. If the RS-232 cable running to your Model 725
is greater than 30 m long, you may need to lower the baud rate to achieve reliable
communication.