Gradall LOED 534A Service Manual - Manual (Page 61)

Items (28) and (30) are not service-
able separate from valve body (3).
Wash all of the motor parts thoroughly
with clean solvent and blow them dry
with compressed air. This action
should remove any foreign matter
trapped in the motor.
Inspect the parts carefully. For
detailed instructions, see ‘’Inspec-
tion of Parts’’ section.
61
22.
23.
24.
25.
26 .
FIGURE 89
FIGURE 90
To disassemble the valve from the
valve body, remove plug (39) and
o-ring (40). (Fig. 16)
Remove spring (32) and piston (27).
(Fig. 90)