Gradall LOED 534A Service Manual - Manual (Page 16)

TWO-PIECE RIMS
Correct
The components in a correctly assembled and locked
two-piece rim fit snugly.
Incorrect
An incorrectly assembled two-piece rim could have a large
gap in side ring. Components are not firmly locked in place.
DO NOT INFLATE TIRE AND RIM ASSEMBLY UNTIL
COMPONENTS ARE PROPERLY SEATED AND LOCKED.
THREE-PIECE RIMS
Correct
A three piece rim that is correctly assembled has firmly-
fitted components: lock ring gap is small with lock ring com-
pletely embedded in its cavity.
An incorrectly assembled three-piece rim. Lock ring is not
seated. DO NOT INFLATE UNTIL LOCK RING IS PROPERLY
SEATED AND LOCKED.
KW, KB, KWX TYPE RIMS
Incorrect
KW, KB, and KWX type rims have
unique configurations that deserve
special mention. Make sure your
assembly pattern matches that
shown in photographs of correctly
assembled rims. DO NOT INFLATE
UNTIL ALL RIM COMPONENTS ARE
PROPERLY LOCKED AND SEATED.
Correct Incorrect
Side ring is seated in
gutter hook.
Rim ends match; rim
locking device is securely
locked.
Side ring is not seated in
gutter hook. Check for
incomplete assembly or
worn rim. Do not inflate
tire.
Rim base is not locked.
One raised end of rim
end means incorrect
assembly or bent rim. Do
not inflate tire.
15
FIGURE 7 FIGURE 9
FIGURE 8 FIGURE 10
FIGURE 11
FIGURE 12 FIGURE 13