OR-Fab 84204 ROCKER PANEL (PAIR) TJL (UNLIMITED) - Manual (Page 3)

3 Jeep TJ, TJL Rocker Panels
Inside of Vehicle
1. Interior trim panels
a. Remove hardware and driver and passenger
kick panels if equipped.
b. Remove driver and passenger carpet beneath
door sills if equipped.
c. Carefully move wiring harness away from driver
door sill.
d. Pull up driver and passenger carpet from floor to
expose drain hole plugs.
e. Drill 1/2” hole through driver and passenger
drain hole plugs.
Kick Panels
Door Sills
Carpet
Floor
Drain Hole
Plug
Carpet
Drain Hole
Plug
Floor
Install Kit
1. TJL Models: Driver rocker panel
a. Using a hydraulic floor jack or other brace, posi-
tion kit rocker panel (driver) onto body. Ensure
kit rocker panel mates flush against body.
b. Align two slots with front drain plug hole and rear
body channel hole.
c. Scribe rear plastic fender well along forward
edge of kit rocker panel (driver) rear mount as
shown.
Drain Plug
Hole
Kit Rocker
Panel
Rear Body
Channel
Hole
Align Slot W/ Drain
Plug Hole Align Slot W/ Body
Channel Hole
Clamps
FRONT
Mark Rear
Plastic
Fender Well
Body
Channel
Kit Rocker
Panel