Brady 300X-PLUS - Manual (Page 85)

Warning Head Cold
Warning Cutter Jammed
Out of Memory*
Brady X-PLUS Series User’s Guide 77
Problem Solution
The printhead is under temperature.
Continue printing while the printhead reaches the
correct operating temperature. If the error remains,
the environment may be too cold for proper printing.
Relocate the printer to a warmer area.
Problem Solution
Cutter blade is in the media path.
Turn off the printer power and unplug the printer.
Inspect the cutter module for debris and clean as
needed following the cleaning instructions on page 70.
Problem Solution
*There is not enough memory to
perform the function shown on the
second line of the error message.
Insufficient DRAM for the label length, downloaded
fonts/graphics, and images.
Ensure that the device, such as FLASH memory or
PCMCIA card, is installed and not write protected or
full.
Ensure that the data is not directed to a device that is
not installed or available.