Brady 300X-PLUS - Manual (Page 23)

Configuring the Printer
The configuration procedure in the next table contains the information you
need to get your printer up and running, but it is not comprehensive. Refer
to page 43 for more information.
n
Enter the configuration mode by pressing the SETUP/EXIT key at the
“PRINTER READY” display.
NOTE: You will need to press the NEXT/SAVE key more than once to
advance to some of the displays.
n
To increase the value, answer “yes,” indicate “on,” or move to the next
selection, use the RIGHT BLACK OVAL key.
n
To decrease the value, answer “no,” indicate “off,” or return to the
previous selection, use the LEFT BLACK OVAL key.
NOTE: When changing parameters, an asterisk (*) in the upper left-hand
corner of the display indicates that you have changed this setting
from what is currently stored in memory.
Brady X-PLUS Series User’s Guide 15