Barco CLM R10+ - Manual (Page 67)

8. Input menu
8. INPUT MENU
Overview
• Overview flow
• Slot module type
• Input locking
• Minimum delay
• Native resolution
• Source switching
• No signal
8.1 Overview flow
Overview
Level 1 Level 2 Level 3
Input
Slot module type 5-cable
HD-SDI - SDI
DVI
DVI HDCP
Input locking Freerun
Automatic
Input 1 to 2
Minimum delay [On/Off]
Native resolution [On/Off]
Source switching Effect
Transition time
No signal Color [black/blue]
Shutdown [Off/On]
Shutdown time
8.2 Slot module type
Overview
• About Input Setup
• Input configuration
8.2.1 About Input Setup
Overview
Each input module must be configured before these module can be used. This configuration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 2 input slots and these slots can be filled up in a random order with the available modules. Identical modules are
allowed.
For more information about the available input modules and how to install, see "Input source connections", page 41.
R59770021 CLM R10+ 11/10/2010 63