Barco CLM R10+ - Manual (Page 158)

14. Service menu
The following items will be displayed:
•
Type of projector
• Projector address
• Package
• Configuration
• Baud rate
• IP address
• MAC address
• Text
• Serial number of projector: this number can be useful when calling for technical assistance.
• Runtime
• Lamp runtimes
• Customer ID
How to display the screen?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Identification and press ENTER.
The identification screen is displayed. (image 14-1, image 14-2, image 14-3)
Image 14-1
Image 14-2
Image 14-3
Add a customer ID to identification window
When on the identification window:
1. Use the ▲ or ▼ key to select Customer ID and press ENTER.
The Customer ID input window opens. (image 14-4)
2. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to selected another character.
Note: Digits can be entered with the digit keys on the remote control or on the local keypad. When a digit is entered in that
way, the next character will be selected automatically.
Image 14-4
154 R59770021 CLM R10+ 11/10/2010