4 removal of the top cover, 5 removal of the side cover, Removal of the top cover – Barco CLM R10+ User Manual

Page 188: Removal of the side cover

17. Projector covers, removal and installation

Image 17-6
Remove back cover

17.4 Removal of the top cover

To remove the top cover, first remove the front and back cover and the lamp door.

Necessary tools

Flat screwdriver

How to remove the top cover

1. Release the captive screw in the middle of the top cover. (image 17-7)

2. Pull the cover out of its locks and take it off.

Image 17-7
Remove top cover

17.5 Removal of the side cover

To remove the side cover, first remove the front, back and top cover.

Necessary tools

Flat screwdriver

How to remove the side cover

1. Loosen both screws. (image 17-8)

2. Lift up the side cover and pull them forward to take off. (image 17-9)

184

R59770021 CLM R10+ 11/10/2010