The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a shorter battery life
time. At delivery the batteries can be found in a separated bag attached to the remote control unit. Before using your remote control,
install the batteries first.

How to install the batteries in the remote control ?

1. Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover upwards (2). (image 3-2)

2. Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery compartment. (image 3-3)

3. Insert (1) the lower tab of the battery cover in the gap at the bottom of the remote control, and press (2) the cover until it clicks

in place. (image 3-4)

Image 3-2

Image 3-3

Image 3-4

To prevent battery explosion

•

Danger of explosion if battery is incorrectly installed.

•

Replace only with the same or equivalent type recommended by the manufacturer.

•

Disposal of used batteries must be done according to the manufacturer’s instruction.

R59770021 CLM R10+ 11/10/2010