Barco CLM R10+ - Manual (Page 124)

12. Alignment menu
Image 12-9
Image 12-10
12.4 Side keystone
What can be done?
The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
Image 12-11
Side keystone
A Keystone adjustment with positive values
B Keystone adjustment with negative values
Side keystone adjustment
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Side keystone and press ENTER.
The keystone dialog box appears.
4. Use the ◄ or ► key to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the ◄ key. The value below the bar scale will
be negative.
When the upper part of the image is smaller than the lower part of the image, push the ► key. The value below the bar scale will
be positive. (image 12-12, image 12-13, image 12-14)
Image 12-12
Image 12-13
Image 12-14
120 R59770021 CLM R10+ 11/10/2010