Brother FAX-565 - Manual (Page 61)

6 - 3 SETUP SEND
Manual transmission
Manual transmission lets you hear the dialing, ringing and fax-receiving tones while
sending a fax.
1
Insert the original face down in the ADF.
2
Pick up the handset and listen for a dial tone.
—OR—
Press Hook and listen for a dial tone.
3
Enter the fax number you want to call. (You can enter the digits using the dial
pad, or you can enter a One-Touch or Speed-Dial number, or you can call
using
Search/Speed Dial .)
(See Storing One-Touch Dial numbers on page 7-1.)
4
When you hear the fax tone,
press
Fax Start .
5
If you’re using the handset, hang up.
Sending a fax at the end of a conversation
At the end of a conversation you can send a fax to the other party before you both
hang up.
1
Ask the other party to wait for fax tones (beeps) and then press Start before
hanging up.
2
Insert the original face down in the ADF.
Press Fax Start .
The LCD shows:
3
Replace the handset.
SEND
SEND