Brother FAX-565 - Manual (Page 11)

ix
Quick Reference Guide
Sending faxes
Automatic transmission
1
Insert the original face down in the
ADF (up to 10 pages).
2
Enter the fax number you want to
call.
3
Press Fax Start .
Receiving faxes
Select Receive Mode
1
Press Receive Mode to select
FAX ONLY , FAX/TEL,
TAD:ANSWER MACH. or MANUAL.
If you select FAX/TEL, make sure
you set Ring Delay and F/T Ring
Time. (See Setting the Ring Delay
on page 5-2 and Setting the F/T
Ring Time (FAX/TEL mode only)
on page 5-3.)
Storing numbers
Storing One-Touch Dial numbers
1
Press Menu/Set , 6 , 1 .
2
Press a One-Touch key where you
want to store a number.
3
Enter a number (up to 20 digits),
and then press
Menu/Set .
4
Enter a name (up to 15 characters)
or leave it blank, and then press
Menu/Set .
5
Press or to select the type
of number and press Menu/Set .
6
Press Stop/Exit .
Storing Speed-Dial numbers
1
Press Menu/Set , 6 , 2 .
2
Enter a two-digit Speed-Dial
number (00-99).
3
Press Menu/Set .
4
Enter a number (up to 20 digits),
and then press
Menu/Set .
5
Enter a name (up to 15 characters)
or leave it blank, and then press
Menu/Set .
6
Press or to select the type
of number and press Menu/Set .
7
Press Stop/Exit .