Brother FAX-565 - Manual (Page 60)

SETUP SEND 6 - 2
How to fax
Automatic transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset or press Hook .
1
Insert the original face down, top edge first in the Automatic Document Feeder
(ADF).
2
Adjust the paper guides to fit the width of your original.
3
Enter the fax number using One-Touch, Speed-Dial, Search or the dial pad.
(See One-Touch dialing, Speed-dialing and Search, pages 6-1 to 6-1.)
4
Press Fax Start .
The ADF can hold up to 10 pages, feeding each one individually through the
fax machine. Use standard 17 lb-23.4 lb (64 g/m
2 -90 g/m 2 ) paper when using
the ADF; if you are using heavier paper, feed each sheet individually to prevent
paper jams.
Press Resolution (before you send the fax) to select the resolution for the
document you are sending. If you wish to send in STANDARD resolution, i.e. a
general fax with no graphics, then the default is STANDARD, and the resolution
button need not be pressed. (See Fax resolution on page 6-5.)
Paper Guides