B&B Electronics EIR505-XX - Manual (Page 58)

48
Manual Documentation Number: EIR505-xx_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Save Configuration
Save the configuration to flash memory. If the switch is powered off without
saving the configuration, all changed configuration will lost
„ Click Save Flash
Save Configuration Interface
Rate Control
Set up each port’s bandwidth rate and packet limitation type
„ Limit Packet type: Select the packet type to filter. The packet filter
types are all packet types, broadcast/multicast/unknown, unicast
packets, broadcast/multicast packets, and broadcast packet only. The
broadcast/multicast/unknown, unicast packet, broadcast/multicast
packet, and broadcast packet only are only for ingress. The egress rate
only supports all packet types.
„ Ports 1 through 5 support port ingress and egress rate control. For
example, assume port 1 is 10Mbps, users can set its effective egress
rate to 1Mbps, and the ingress rate to 500Kbps.
¾ Ingress: Select the port effective ingress rate. The valid range
value is 1MB, 2MB, 4MB, 8MB, 16MB, 32MB and 64MB. The
default value is “disable”
¾ Egress: Select the port effective ingress rate. The valid range
value is 128kbps, 256Kbps, 512Kbps, 1MB, 2MB, 4MB, and 8MB.
The default value is “disable”
„ Click Apply